3D Printed Stuff

[ratcheeroo]

Just thought I would start a thread for 3D printed stuff. I found a free download today at Graycle Hobby for their Ranger Mini 3D printed trainer. I noticed something else there called the Orca, looks like maybe it was the inspiration behind the Flerken, a lot of similarities there.

craycle.com/product/ranger-mini-3ch-trainer-plane-stl-files/

[Mr NCT]

Powering the Raspberry Pi 4B:

Here's what I ended up doing since I already had a power supply for the Raspberry. The Pi consumes 6W at full load which at the 110vac source equals a 0.06A current draw. So I attached a cheapo 2 outlet extension cord to the Ender 3v2 after the power switch so when I turn on the printer it turns on the Pi and I've got another outlet for a low draw LED light in the future. This solution, unfortunately, did not require any 3D printing so I bought a cheapo camera (seeing a recurring theme?) and printed a case, ball & socket swivel and a clip to attach to my enclosure. I feel partially redeemed.

Camera: www.amazon.com/dp/B0994G7DR6/?tag=lstir-20

Longer ribbon cable: www.amazon.com/dp/B07WF91QML/?tag=lstir-20