|
Post by Burkeomatic on Nov 19, 2022 14:23:11 GMT
|
|
|
Post by ratcheeroo on Nov 20, 2022 15:04:12 GMT
Very cool planes.
|
|
|
Post by xsrcing on Nov 20, 2022 15:52:48 GMT
There are so many freaking options for a 3D printer now.
I really want to build the 600mm Gremlin.
|
|
|
Post by Burkeomatic on Nov 21, 2022 20:08:08 GMT
There are so many freaking options for a 3D printer now. I really want to build the 600mm Gremlin. I have one printed out, the first one was a little rough then he revised the files. First one flew pretty well. I think he wants a dollar for those files. More than fair consideeing the work he put in. I was in the beta group on that. 3D printed planes shatter when you have a whoopsie.
|
|
|
Post by Burkeomatic on Dec 24, 2022 18:07:30 GMT
I had some issues with some pla I was printing the saber out of, you also need to use a raft when printing fuse 3 and 4.
I am printing it in PETG this time around, so hopefully it will be a little more tough, and look good too.
I am just using the 13 dollar a roll amazon basics clear PETG and I am going to put some LEDs up in it, so hopefully it will look gnarly.
|
|
|
Post by Burkeomatic on Dec 25, 2022 5:36:26 GMT
Looking sweet.
|
|
|
Post by Burkeomatic on Jan 1, 2023 16:15:38 GMT
Almost there.
|
|
|
Post by Mr NCT on Jan 1, 2023 17:37:51 GMT
I can just see that flying at night lit from the inside. Cool
|
|
|
Post by Burkeomatic on Jan 1, 2023 23:55:03 GMT
I can just see that flying at night lit from the inside. Cool It is 100 percent getting LEDs.
|
|
|
Post by Burkeomatic on Jan 2, 2023 19:06:41 GMT
Alrighty, we are good to go. Gonna start installing electronics in it. Looks like the battery will end up being a 4S1P 21700 pack. I will probably maiden it with a basic 4s2200. Gonna have 2204/2300kv motors spinning 5x5 props. I think the SU-29 will end up being next on the 3d print list.
|
|
|
Post by Burkeomatic on Jan 9, 2023 23:00:47 GMT
This dude keeps firing them out.
|
|
|
Post by Burkeomatic on Jan 10, 2023 14:21:32 GMT
I thought I smoked my FC for this last night. I had one of those sketch VTXs from my 30 dollar box of FPV goodies, and I hooked it up to the FC and smoke started pouring out of it.
Grr.
Turns out where the VTX can be powered by the battery through a passthrough in the FC also has a LC filter built in to help with FPV video quality. A LC filter is just an inductor in series and capacitor in parallel. So apparently it just drew enough current (must have been more than 3A from what I can tell) it smoked the little inductor and the FC board should be fine. I'll probably just solder a wire there and stick a LC filter in there since I have a couple.
But, as I hurrily tore my FC apart I flung a couple of those little brass stand offs and chunked it in the trash before digging it out because something didn't seem right, so I need to find those. LOL
|
|
|
Post by Burkeomatic on Jan 12, 2023 4:14:42 GMT
All we need now is servo links! Sending it this weekend.
|
|
|
Post by Burkeomatic on Jan 17, 2023 6:09:12 GMT
The sabre had a great maiden today. Trials and tribulations up until this point. ratcheeroo, you need to build one.
|
|
|
Post by Burkeomatic on Jan 22, 2023 3:43:28 GMT
This thing hauls nuggets.
I launched it at 100 percent throttle and I was shocked how fast it just ripped away. Then I played back the video, it went 0-110kmh in about 2.5 seconds.
I did some neat flyovers, my daughter was on the camera.
This thing is a rocket ship, cruising at 55 percent throttle, it draws 10 amps and is going 65-70 mph.
|
|